Guide

Gas Oven Not Staying Lit? Here’s Why And What To Do About It

Chef Emily Clark is the editor-in-chief and leading culinary expert at Cookupexperts.com. She has over 20 years of professional cooking experience, including working as a private chef for celebrities and heads of state. Emily holds a master's degree in Culinary Arts from the Culinary Institute of America. In addition to...

What To Know

  • This can be caused by a variety of issues, such as a clogged pilot tube, a faulty thermocouple, or a draft that blows out the flame.
  • To check if the pilot light is the problem, carefully remove the access panel to the oven and check the pilot light.
  • If the gas supply does not seem to be the problem, you may need to call a professional to check the gas line.

Gas ovens are a popular choice in kitchens because they are easy to use and provide even heat.

Why Not Gas Oven Stay Lit?

Gas ovens use either a pilot light or an electric ignitor to light the gas. If the pilot light goes out, the oven won’t stay lit. This can be caused by a variety of issues, such as a clogged pilot tube, a faulty thermocouple, or a draft that blows out the flame.

To troubleshoot a gas oven that won’t stay lit, start by checking the owner’s manual for instructions on how to relight the pilot light. If the pilot light goes out again, you may need to call a professional to take a look.

If the oven uses an electric ignitor, the issue could be with the ignitor itself or with the wiring. To check the ignitor, remove the oven’s front panel and locate the ignitor. If it’s glowing red, it’s likely working properly. If the ignitor is not glowing, you may need to replace it.

To check the wiring, you’ll need to use a multimeter to test the continuity between the ignitor and the power source. If the continuity is good, the issue is likely with the ignitor. If the continuity is bad, you’ll need to check the wiring for breaks or shorts.

If you’re unable to troubleshoot the issue yourself, it’s best to call a professional. They will be able to diagnose the problem and make any necessary repairs.

What Are The Possible Causes Of A Gas Oven Not Staying Lit?

  • 1. Faulty igniter: The igniter is a critical component that lights the gas in the oven. A faulty igniter can cause the oven to not stay lit.
  • 2. Dirty igniter: The igniter can become dirty over time, which can prevent it from lighting the gas properly. Cleaning the igniter may solve the problem.
  • 3. Faulty gas valve: The gas valve controls the flow of gas to the oven. A faulty gas valve can prevent the oven from staying lit.
  • 4. Faulty flame sensor: The flame sensor detects the presence of a flame in the oven. If the sensor is not working properly, the oven may not stay lit.
  • 5. Faulty temperature sensor: The temperature sensor measures the temperature of the oven. If the sensor is not working properly, the oven may not stay lit.

How Can I Troubleshoot A Gas Oven That Is Not Staying Lit?

A gas oven not staying lit is a common problem that can occur due to various reasons. Here are a few steps you can take to troubleshoot the issue:

1. Check the pilot light: The most common reason for a gas oven not staying lit is a malfunctioning pilot light. The pilot light is a small flame that ignites the main burner of the oven. If the pilot light goes out, the main burner will not stay lit. To check if the pilot light is the problem, carefully remove the access panel to the oven and check the pilot light. If the pilot light is out, you can relight it following the instructions in your owner’s manual.

2. Clean the burner ports: Over time, food particles and grease can build up in the oven’s burner ports, preventing the gas from flowing properly. This can lead to the oven not staying lit. To clean the burner ports, turn off the gas supply to the oven and allow it to cool. Remove the burners and use a brush or compressed air to clean out any debris from the ports.

3. Check the gas supply: A gas oven not staying lit can also be caused by a malfunctioning gas supply. Make sure that the gas supply to the oven is turned on and that the shut-off valve is fully open. If the gas supply does not seem to be the problem, you may need to call a professional to check the gas line.

4. Check the igniter: The igniter is responsible for lighting the gas in the oven. If the igniter is faulty, the oven may not stay lit. To check the igniter, remove the access panel to the oven and locate the igniter. Inspect the igniter for any signs of damage, such as cracks or corrosion. If the igniter appears to be damaged, you may need to replace it.

Are There Any Safety Concerns I Should Be Aware Of If My Gas Oven Is Not Staying Lit?

Yes, there are a few safety concerns to be aware of if your gas oven is not staying lit.

1. Gas Leaks: If the oven is not staying lit, it could be an indication of a gas leak. Gas leaks can be very dangerous, so it is important to address them as soon as possible. If you suspect a gas leak, you should immediately turn off the gas supply to the oven and contact a professional for assistance.

2. Carbon Monoxide Poisoning: If your gas oven is not staying lit, it may also be releasing carbon monoxide, a colorless and odorless gas that can be deadly. Carbon monoxide poisoning can occur when gas appliances are not functioning properly. To protect yourself and your family, it is important to have a carbon monoxide detector in your home and to check the batteries regularly.

3. Fire Hazard: If the oven is not staying lit, it may also be a fire hazard. If the gas is not burning properly, it could build up and cause a fire. It is important to have your oven checked by a professional to ensure that it is functioning properly and to reduce the risk of a fire.

If you are experiencing problems with your gas oven, it is important to contact a professional for assistance. They will be able to diagnose the problem and make any necessary repairs to ensure the safety of you and your family.

Can A Faulty Igniter Cause A Gas Oven Not To Stay Lit?

Yes, a faulty igniter can cause a gas oven not to stay lit. The igniter is the device that creates the spark that lights the gas burner in the oven. If the igniter is faulty, it may not create a strong enough spark to light the gas, or it may not stay lit long enough for the gas to ignite. This can cause the gas oven to go out or not stay lit. In some cases, the igniter may need to be replaced in order to fix the oven.

Can A Clogged Burner Cause A Gas Oven Not To Stay Lit?

A clogged burner can cause a gas oven not to light because the flame from the burner can’t properly ignite the natural gas flowing to the oven. The clogged burner prevents air from properly mixing with the gas, which is necessary for the ignition process. As a result, the flame may sputter or fail to ignite completely, causing the oven not to light. To fix this issue, you can clean the burner using a toothbrush and a mixture of water and baking soda. This will help remove any food or debris that may be clogging the burner, allowing it to function properly.

In a nutshell

In conclusion, while it may seem strange that a gas oven won’t stay lit, it’s simply due to the safety mechanisms in place to prevent gas leaks. By following these simple troubleshooting steps, you should be able to get your gas oven back up and running in no time.

Chef Emily Clark

Chef Emily Clark is the editor-in-chief and leading culinary expert at Cookupexperts.com. She has over 20 years of professional cooking experience, including working as a private chef for celebrities and heads of state. Emily holds a master's degree in Culinary Arts from the Culinary Institute of America. In addition to directing the content at Cookupexperts, she writes recipes and product reviews for major food publications. Emily is dedicated to teaching home cooks how to achieve restaurant-quality results through meticulous testing and step-by-step instructions. Her engaging writing style and passion for food shine through in all of her work. When not in the test kitchen, Emily enjoys traveling the world in search of new culinary inspirations.
Back to top button