Whirlpool Side by Side Fridge Not Cooling? Find Out Why While the Freezer Works

A common problem with Whirlpool side-by-side refrigerators is that the refrigerator compartment is not cooling, while the freezer is working fine. There are a few reasons why this might be happening. The most common reason is that the refrigerator door is not properly sealed. If the door is not sealed, cold air can escape from the refrigerator, and it will not cool properly. Another possible reason is that the refrigerator’s evaporator coils are frozen. If the coils are frozen, the refrigerator will not be able to cool properly.

Why Is Whirlpool Side By Side Fridge Not Cooling But Freezer Works?

If your Whirlpool side-by-side fridge is not cooling but the freezer is working, there are a few potential causes. Here are some steps you can take to troubleshoot the issue:

Check the evaporator: The evaporator is responsible for cooling the fridge. If it is not working properly, the fridge will not cool. To check the evaporator, you will need to remove the freezer door and look for any signs of damage or blockages.

Check the condenser: The condenser is located in the back of the fridge and is responsible for cooling the refrigerant. If it is not working properly, the fridge will not cool. To check the condenser, you will need to remove the back panel and look for any signs of damage or blockages.

Check the compressor: The compressor is located in the bottom of the fridge and is responsible for circulating the refrigerant. If it is not working properly, the fridge will not cool. To check the compressor, you will need to listen for any strange noises or look for any signs of damage.

Check the door seals: The door seals are responsible for keeping the cold air inside the fridge. If they are not working properly, the fridge will not cool. To check the door seals, you will need to look for any signs of damage or wear and tear.

Check the temperature settings: The temperature settings for the fridge and freezer may be set too high or too low. To check the settings, you will need to look at the control panel and adjust the settings as needed.

Check the power source: The fridge may not be getting power if it is not working.

What Could Be The Reason For The Refrigerator Not Cooling But The Freezer Working?

• 1. The refrigerator may not be cooling properly because the evaporator is not working properly. The evaporator is a key component in the refrigeration cycle and it may be damaged or clogged.
• 2. The refrigerator may not be cooling properly because the condenser is not working properly. The condenser is another key component in the refrigeration cycle and it may be damaged or clogged.
• 3. The refrigerator may not be cooling properly because the compressor is not working properly. The compressor is a critical component in the refrigeration cycle and it may be damaged or clogged.
• 4. The refrigerator may not be cooling properly because the door is not sealing properly. The door may be damaged or the seal may be worn out.
• 5. The refrigerator may not be cooling properly because the temperature is set too high. The temperature may need to be adjusted to a lower setting to allow the refrigerator to cool properly.

How Can You Check The Fridge’s Cooling System?

The refrigerator is the most important component of a kitchen. It’s what keeps your food cold and your drinks cool. But what happens when your fridge starts to act up?

If you notice that your fridge is not cooling properly, it’s important to take action right away. There are a few things you can do to check the fridge’s cooling system and make sure it’s working properly.

First, check the temperature settings on your fridge. Make sure that the temperature is set to the right level for your needs. If the temperature is set too high, your fridge will not be able to cool properly.

Next, check the door seals on your fridge. Make sure that they are clean and free of any damage. If the door seals are damaged, they may not be able to keep the cold air inside the fridge.

Finally, check the compressor on your fridge. The compressor is the component that actually cools the fridge. If it’s not working properly, your fridge will not be able to cool properly.

If you notice any of these problems, it’s important to take action right away. Call a repair technician to come and take a look at your fridge. They will be able to diagnose the problem and fix it properly.

By taking action right away, you can prevent your fridge from getting any worse.

What Are The Possible Causes For A Fridge Not Cooling?

A fridge not cooling could have several possible causes. Some of the most common include:

– A dirty or blocked condenser coil. This coil is responsible for releasing heat from the fridge, and if it’s dirty or blocked, it won’t be able to do its job properly.

– A faulty compressor. The compressor is the part of the fridge that circulates the refrigerant, and if it’s not working properly, the fridge won’t be able to cool down.

– A leak in the cooling system. If there’s a leak in the cooling system, the fridge won’t be able to cool down properly.

– A faulty thermostat. The thermostat is the part of the fridge that controls the temperature, and if it’s not working properly, the fridge won’t be able to cool down to the desired temperature.

– A dirty or blocked air filter.

How Can You Fix A Fridge That Is Not Cooling?

There are several reasons why a fridge may not be cooling properly. It could be due to a faulty compressor, a leak in the cooling system, or a problem with the door seal. If you have a faulty compressor, you may hear a loud grinding or clicking noise coming from the fridge. If you have a leak in the cooling system, you may notice a build-up of ice on the back of the fridge or on the floor underneath it. If you have a problem with the door seal, you may notice that the fridge is not sealing properly, or you may notice that the fridge is not cooling evenly.

To fix a fridge that is not cooling properly, you should first check the compressor to make sure it is working properly. If the compressor is working properly, you should then check the cooling system to make sure there are no leaks. If there are no leaks, you should then check the door seal to make sure it is working properly.

What Are The Safety Precautions To Take When Repairing A Fridge?

When repairing a fridge, it is important to take precautions to ensure your safety and the safety of those around you. Here are a few safety precautions to take when repairing a fridge:

1. Turn off the power: Before starting any repairs, make sure to turn off the power to the fridge. This will prevent any electrical shocks or injuries.

2. Wear safety equipment: To protect yourself from potential hazards, wear safety equipment such as gloves, eye protection, and a mask.

3. Use tools properly: Use tools properly and follow the manufacturer’s instructions. Don’t use tools that are damaged or that you are not familiar with.

4. Work in a well-lit area: Working in a well-lit area will help you see potential hazards and prevent injuries.

5. Have a plan: Before starting any repairs, have a plan for what you will do and how you will do it. This will help you avoid any potential hazards or complications.

The Bottom Line

It’s a mystery why this fridge isn’t cooling, but the freezer is working just fine. It’s possible that there’s a problem with the compressor, or maybe the fridge is just too full. Whatever the reason, it’s a shame that the fridge isn’t working properly. It’s a great fridge, and it’s a shame to see it not working at its full potential. If you’re having trouble with your fridge, make sure to call a repairman or take it to a repair shop. It’s important to get it fixed as soon as possible, before the problem gets any worse.