Elevate Your Kitchen Style: How To Sew A Stylish Kitchenaid Stand Mixer Cover In 3 Easy Steps

Protect your beloved KitchenAid stand mixer from dust, grease, and scratches with a custom-sewn cover. This DIY project is a fun and easy way to add a personal touch to your kitchen while keeping your mixer looking its best. Follow this step-by-step guide to learn how to sew a KitchenAid stand mixer cover that fits perfectly and complements your kitchen décor.

Materials Needed

• Fabric: Choose a durable and easy-to-clean fabric like cotton canvas, duck cloth, or quilting cotton.
• Coordinating thread
• Scissors
• Sewing machine
• Measuring tape
• Pins
• Iron and ironing board
• Fabric marker or chalk
• Seam allowance: 1/2 inch unless otherwise specified

Step-by-Step Instructions

1. Measure and Cut the Fabric

1. Measure the height and circumference of the mixer bowl.
2. Cut two pieces of fabric:

• One piece for the body of the cover: Height of the bowl + 1 inch for seam allowance
• One piece for the top of the cover: Circumference of the bowl + 1 inch for seam allowance

2. Sew the Side Seams

1. With right sides together, pin the two pieces of fabric along the side edges.
2. Sew a 1/2 inch seam allowance along the pinned edges.
3. Press the seam open.

3. Make the Casing for the Elastic

1. Cut a strip of fabric that is 2 inches wide and the same length as the circumference of the bowl.
2. Fold the strip in half lengthwise and press.
3. Pin the folded strip to the top edge of the cover, right sides together.
4. Sew a 1/2 inch seam allowance along the pinned edge.
5. Turn the casing right side out and press.

4. Insert the Elastic

1. Cut a piece of elastic that is slightly shorter than the circumference of the bowl.
2. Thread the elastic through the casing, using a safety pin if necessary.
3. Overlap the ends of the elastic and sew them together securely.

5. Hem the Bottom Edge

1. Fold the bottom edge of the cover up 1/2 inch and press.
2. Fold the edge up again 1/2 inch and press.
3. Pin the hem in place and sew a 1/2 inch seam allowance along the folded edge.

6. Add Optional Embellishments

1. Embroider or appliqué a design onto the cover.
2. Add a ruffle or trim around the edge of the cover.
3. Use fabric paint to create a unique pattern.

7. Enjoy Your Custom-Sewn Cover

Slip the cover onto your KitchenAid stand mixer and admire your handiwork. Your mixer is now protected from dust, grease, and scratches, and you have a stylish accessory that adds a personal touch to your kitchen.

Finishing Touches

• For a perfect fit, try the cover on the mixer before sewing the hem. Adjust the elastic as needed.
• If you are using a thick fabric, consider using a walking foot on your sewing machine to prevent the fabric from puckering.
• Be creative with your fabric choice and embellishments to create a cover that matches your personal style and kitchen décor.

A Cover for Every Occasion

Whether you’re looking for a simple, functional cover or a stylish statement piece, this DIY project is a great way to protect your KitchenAid stand mixer and add a personal touch to your kitchen. With a little creativity and some basic sewing skills, you can create a custom-sewn cover that fits your needs and preferences.

Popular Questions

Q: What is the best fabric to use for a KitchenAid stand mixer cover?

A: Choose a durable and easy-to-clean fabric like cotton canvas, duck cloth, or quilting cotton.

Q: How do I measure the fabric for the cover?

A: Measure the height and circumference of the mixer bowl. Add 1 inch to both measurements for seam allowance.

Q: How do I insert the elastic into the casing?

A: Cut a piece of elastic that is slightly shorter than the circumference of the bowl. Thread the elastic through the casing, using a safety pin if necessary. Overlap the ends of the elastic and sew them together securely.