Guide

How To Replace A Whirlpool Wall Oven Thermal Fuse: A Step-by-step Guide For Diyers

Chef Emily Clark is the editor-in-chief and leading culinary expert at Cookupexperts.com. She has over 20 years of professional cooking experience, including working as a private chef for celebrities and heads of state. Emily holds a master's degree in Culinary Arts from the Culinary Institute of America. In addition to...

What To Know

  • When the oven reaches a certain temperature, the thermal fuse blows, interrupting the flow of electricity to the heating element.
  • By following the steps in this guide, you can safely and easily replace the thermal fuse and get your oven back up and running in no time.
  • Set the multimeter to the ohms setting and then touch the probes to the terminals on the thermal fuse.

If your Whirlpool wall oven is not heating properly, the thermal fuse may be blown. A thermal fuse is a safety device that prevents the oven from overheating. It is a small, cylindrical device that is located near the heating element. When the oven reaches a certain temperature, the thermal fuse blows, interrupting the flow of electricity to the heating element. This prevents the oven from getting too hot and causing a fire. Replacing a thermal fuse is a relatively simple repair that can be done by most do-it-yourselfers.

Tools and Materials Needed

  • Screwdriver
  • Pliers
  • Wire stripper
  • New thermal fuse (part number WP8577274)
  • Safety glasses
  • Gloves

Steps to Replace a Whirlpool Wall Oven Thermal Fuse

1. Turn off the power to the oven. This can be done by unplugging the oven or by turning off the circuit breaker that supplies power to the oven.
2. Remove the oven door. To do this, open the oven door and locate the two screws that hold the door in place. Remove the screws and then lift the door off of the oven.
3. Locate the thermal fuse. The thermal fuse is usually located near the heating element. It is a small, cylindrical device with two wires attached to it.
4. Disconnect the wires from the thermal fuse. Use the pliers to disconnect the wires from the thermal fuse. Be careful not to touch the metal terminals on the thermal fuse, as they may be hot.
5. Remove the thermal fuse. Once the wires are disconnected, you can remove the thermal fuse from the oven. Use the screwdriver to pry the thermal fuse out of its mounting bracket.
6. Install the new thermal fuse. Insert the new thermal fuse into the mounting bracket. Make sure that the wires are properly connected to the terminals on the thermal fuse.
7. Reattach the oven door. Once the new thermal fuse is installed, you can reattach the oven door. Replace the two screws that hold the door in place.
8. Turn on the power to the oven. Plug the oven back in or turn on the circuit breaker that supplies power to the oven. Test the oven to make sure that it is heating properly.

Troubleshooting

If you have replaced the thermal fuse and the oven is still not heating properly, there may be another problem with the oven. Some common problems that can cause an oven to not heat properly include:

  • A faulty heating element
  • A faulty thermostat
  • A faulty control board
  • A faulty wiring connection

If you are not sure what is causing the problem, you should call a qualified appliance repair technician for assistance.

Safety Tips

When replacing a thermal fuse, it is important to take the following safety precautions:

  • Always turn off the power to the oven before starting the repair.
  • Be careful not to touch the metal terminals on the thermal fuse, as they may be hot.
  • Use safety glasses and gloves when performing the repair.
  • If you are not sure how to replace the thermal fuse, you should call a qualified appliance repair technician for assistance.

Wrapping Up

Replacing a Whirlpool wall oven thermal fuse is a relatively simple repair that can be done by most do-it-yourselfers. By following the steps in this guide, you can safely and easily replace the thermal fuse and get your oven back up and running in no time.

Questions We Hear a Lot

Q: What are the signs of a blown thermal fuse in a Whirlpool wall oven?

A: The most common sign of a blown thermal fuse is that the oven will not heat up properly. Other signs include the oven cycling on and off frequently, or the oven overheating.

Q: How can I test a thermal fuse to see if it is blown?

A: To test a thermal fuse, you can use a multimeter. Set the multimeter to the ohms setting and then touch the probes to the terminals on the thermal fuse. If the multimeter reads “OL” (open line), then the thermal fuse is blown.

Q: Where can I find a replacement thermal fuse for my Whirlpool wall oven?

A: You can find a replacement thermal fuse for your Whirlpool wall oven at most appliance parts stores. You can also find replacement thermal fuses online.

Chef Emily Clark

Chef Emily Clark is the editor-in-chief and leading culinary expert at Cookupexperts.com. She has over 20 years of professional cooking experience, including working as a private chef for celebrities and heads of state. Emily holds a master's degree in Culinary Arts from the Culinary Institute of America. In addition to directing the content at Cookupexperts, she writes recipes and product reviews for major food publications. Emily is dedicated to teaching home cooks how to achieve restaurant-quality results through meticulous testing and step-by-step instructions. Her engaging writing style and passion for food shine through in all of her work. When not in the test kitchen, Emily enjoys traveling the world in search of new culinary inspirations.
Back to top button