Diy Fix: How To Replace Kenmore Upright Freezer Door Seal And Save Money
What To Know
- Once the old seal is removed, use a putty knife to clean the area where the seal was attached, removing any dirt or debris.
- Measure the length of the old door seal and cut the new seal to the same length.
- If you are replacing the seal on a freezer that is still under warranty, contact the manufacturer to see if they will cover the cost of the replacement.
Replacing the door seal on your Kenmore upright freezer is a relatively easy task that can be completed in under an hour. By following these simple steps, you can save yourself the cost of calling a repairman and ensure that your freezer is properly sealed, preventing warm air from entering and compromising the temperature inside.
Tools and Materials Needed
- Phillips head screwdriver
- Flat head screwdriver
- Putty knife
- Tape measure
- Scissors
- New door seal (make sure to order the correct model for your freezer)
- Gloves
Steps to Replace Kenmore Upright Freezer Door Seal
1. Unplug the Freezer and Empty the Contents
Before you begin working on the freezer, unplug it from the power outlet to prevent any electrical accidents. Once the freezer is unplugged, empty the contents and place them in a cooler or another freezer to keep them cold.
2. Remove the Old Door Seal
Using a flat head screwdriver, carefully pry off the old door seal from the freezer door. Be careful not to damage the door or the seal itself. Once the old seal is removed, use a putty knife to clean the area where the seal was attached, removing any dirt or debris.
3. Measure and Cut the New Door Seal
Measure the length of the old door seal and cut the new seal to the same length. Make sure to cut the seal straight and evenly.
4. Install the New Door Seal
Start by applying a thin bead of sealant to the area where the new seal will be attached. Carefully align the seal with the door and press it into place, ensuring that it is properly seated in the groove. Use a Phillips head screwdriver to secure the seal in place with the provided screws.
5. Test the New Door Seal
Once the new seal is installed, close the freezer door and check for any gaps or leaks. If you find any gaps, adjust the seal until it is properly sealed. You can also use a flashlight to check for any light leaks around the seal.
6. Reconnect the Freezer and Allow it to Cool
Plug the freezer back into the power outlet and allow it to cool down for at least 24 hours before restocking it with food. This will give the seal time to properly set and ensure that the freezer is properly sealed.
Tips for Replacing Kenmore Upright Freezer Door Seal
- If you are having trouble removing the old seal, you can use a hair dryer to warm it up and soften the adhesive.
- Be careful not to overtighten the screws when securing the new seal. This can damage the seal and cause it to leak.
- If you are replacing the seal on a freezer that is still under warranty, contact the manufacturer to see if they will cover the cost of the replacement.
Troubleshooting Kenmore Upright Freezer Door Seal Problems
- Door seal is not properly seated: Make sure that the seal is properly seated in the groove on the freezer door. If it is not, adjust the seal until it is properly seated.
- Seal is damaged: If the seal is damaged, it will need to be replaced. You can order a replacement seal from the manufacturer or from an online retailer.
- Door is not closing properly: If the door is not closing properly, it may be due to a misaligned door or a damaged hinge. Inspect the door and hinges for any damage and adjust or replace them as needed.
How Can I Prevent Kenmore Upright Freezer Door Seal Problems?
- Clean the door seal regularly with a mild detergent and water.
- Avoid opening and closing the freezer door too often.
- Make sure that the freezer is level.
- Keep the freezer in a cool, dry place.
Answers to Your Most Common Questions
Q: How often should I replace the door seal on my Kenmore upright freezer?
A: The door seal should be replaced every 5-7 years, or more often if it is damaged.
Q: Can I replace the door seal on my Kenmore upright freezer myself?
A: Yes, you can replace the door seal on your Kenmore upright freezer yourself by following the steps outlined in this guide.
Q: Where can I find a replacement door seal for my Kenmore upright freezer?
A: You can order a replacement door seal for your Kenmore upright freezer from the manufacturer or from an online retailer.
