Easy Fix: How To Replace Frigidaire Microwave Turntable Motor In insert Minutes

Replacing a faulty turntable motor in your Frigidaire microwave is a relatively simple task that can be completed in a matter of minutes. By following this step-by-step guide, you can easily restore your microwave to proper working order.

Necessary Tools

Before you begin, ensure you have the following tools on hand:

• Screwdriver
• Pliers
• Replacement turntable motor (compatible with your Frigidaire microwave model)

Safety Precautions

1. Unplug the Microwave: Always unplug the microwave from the power outlet before attempting any repairs. This ensures that you are not at risk of an electrical shock.

2. Allow the Microwave to Cool: If you have recently used the microwave, allow it to cool down completely before starting the repair. This will prevent you from accidentally burning yourself.

Procedure:

1. Remove the Microwave’s Outer Casing:

• Locate the screws that secure the outer casing to the microwave. These screws are typically found on the back or sides of the microwave.
• Use the screwdriver to remove the screws and carefully lift off the outer casing.

2. Locate the Turntable Motor:

• Once the outer casing is removed, you will see the turntable motor. It is usually located at the bottom of the microwave, underneath the turntable.

3. Disconnect the Motor’s Wires:

• Identify the wires connected to the turntable motor. These wires are usually held in place by plastic connectors.
• Use the pliers to gently pry open the connectors and disconnect the wires from the motor.

4. Remove the Old Motor:

• Once the wires are disconnected, you can remove the old motor. It is usually held in place by a few screws or clips.
• Use the screwdriver or pliers to remove the screws or clips and carefully lift out the old motor.

5. Install the New Motor:

• Position the new motor in the same place as the old motor.
• Secure the new motor in place using the screws or clips that you removed earlier.

6. Reconnect the Motor’s Wires:

• Reconnect the wires to the new motor by pushing them into the plastic connectors. Ensure that the wires are securely connected.

7. Replace the Microwave’s Outer Casing:

• Carefully align the outer casing with the microwave and replace the screws that you removed earlier.
• Tighten the screws securely to ensure that the outer casing is properly secured.

8. Test the Microwave:

• Plug the microwave back into the power outlet and turn it on.
• Place a cup of water on the turntable and start the microwave.
• Observe the turntable to ensure that it is rotating smoothly.

Troubleshooting:

If the turntable is not rotating after replacing the motor, check the following:

• Power Supply: Ensure that the microwave is properly plugged into a working power outlet.
• Wiring: Double-check that the wires are correctly connected to the new motor.
• Motor Compatibility: Verify that the replacement motor is compatible with your specific Frigidaire microwave model.

Tips for Maintaining Your Microwave Turntable Motor:

• Regular Cleaning: Clean the turntable and turntable motor regularly to prevent food particles and grease buildup.
• Avoid Overloading: Do not overload the microwave with too much food or heavy cookware.
• Proper Use: Use the microwave only for its intended purpose. Avoid using it to heat non-food items or dry clothing.

‘How to Replace Frigidaire Microwave Turntable Motor: A Comprehensive Guide’ – Wrapping Up

Replacing a Frigidaire microwave turntable motor is a straightforward task that can be completed with basic tools and minimal technical skills. By following the steps outlined in this guide, you can easily restore your microwave to proper working order and enjoy delicious, evenly cooked meals once again.

What You Need to Learn

Q1. What are the signs that my Frigidaire microwave turntable motor needs to be replaced?

A1. Common signs include the turntable not rotating smoothly, making unusual noises, or failing to rotate altogether.

Q2. Can I use a generic turntable motor for my Frigidaire microwave?

A2. It’s best to use a replacement motor specifically designed for your Frigidaire microwave model to ensure compatibility and proper fit.

Q3. How often should I clean the turntable motor in my microwave?

A3. Regularly clean the turntable motor to prevent food particles and grease buildup, which can affect its performance.