Discover the Ultimate Guide on How to Put Bissell Vacuum Back Together

So, you’ve tackled the daunting task of disassembling your Bissell vacuum for cleaning or repairs, and now you’re staring at a pile of parts, wondering how on earth you’re going to put it all back together. Don’t worry, it’s not as complicated as it seems. This comprehensive guide will walk you through the process of reassembling your Bissell vacuum, making it a breeze.

Before You Begin: Gathering Your Tools and Parts

Before diving into the reassembly process, ensure you have everything you need. Here’s a checklist:

• Your Bissell vacuum parts: Make sure you have all the components, including the main body, hose, attachments, filters, and any other accessories.
• Your owner’s manual: This is your lifeline. It contains specific instructions and diagrams for your model.
• A clean, dry workspace: A clutter-free area will make reassembly much easier.
• A Phillips screwdriver: Most Bissell vacuums use Phillips screws.
• A flathead screwdriver: This might be needed for certain models.

Step 1: Reassembling the Vacuum Body

Let’s start with the core of your vacuum.
1. Locate the main body: This is the largest component, often housing the motor and dustbin.
2. Reattach the hose: Find the hose connection point on the vacuum body and carefully align the hose with it. Secure it by twisting it clockwise until it clicks into place.
3. Connect the wand: If your vacuum has a detachable wand, connect it to the hose using the same twisting mechanism.
4. Install the dustbin: Slide the dustbin into its designated slot on the vacuum body, ensuring it aligns properly. Secure it with the latch or clips.

Step 2: Reattaching the Attachments and Accessories

Now, let’s add the tools that make your Bissell vacuum versatile.
1. Reattach the crevice tool: This is usually a long, narrow attachment used for cleaning tight spaces. Insert it into the designated slot on the hose or wand.
2. Attach the upholstery tool: This brush-like attachment is great for cleaning carpets and upholstery. Secure it to the hose or wand.
3. Install any other accessories: If your Bissell vacuum has additional attachments like dusting brushes or extension wands, reassemble them according to the instructions in your owner’s manual.

Step 3: Replacing the Filters

Clean filters are crucial for maintaining your vacuum’s performance.
1. Locate the filter compartments: Your Bissell vacuum will have multiple filter compartments, typically for the pre-motor filter, HEPA filter, and post-motor filter.
2. Replace the filters: Refer to your owner’s manual for the specific filter types and their placement. Make sure the filters are securely installed.
3. Check for proper sealing: Ensure all filter compartments are tightly closed to prevent air leaks.

Step 4: Reattaching the Power Cord

Now, let’s get your vacuum back up and running.
1. Find the power cord connection: This is usually located on the back or side of the vacuum body.
2. Plug in the power cord: Align the power cord plug with the corresponding socket and gently push it in until it clicks into place.

Step 5: Testing Your Reassembled Vacuum

You’re almost done! Now, it’s time to see if everything works as it should.
1. Turn on the vacuum: Press the power button and check if the motor starts.
2. Check the suction: Test the vacuum’s suction by holding the hose over a piece of paper or fabric.
3. Test the attachments: Try using each attachment to ensure they work properly.
4. Listen for any unusual noises: If you hear any grinding, rattling, or other unusual sounds, stop and troubleshoot the issue.

Final Thoughts: Your Bissell Vacuum is Ready to Tackle the Dirt!

Congratulations! You’ve successfully reassembled your Bissell vacuum and are ready to tackle any cleaning task. Remember to always follow the instructions in your owner’s manual for your specific model.
By following these steps, you’ve not only saved money on professional repairs but also gained a deeper understanding of your vacuum.

Basics You Wanted To Know

Q: What if I’m missing a part?
A: If you’re missing a part, you can usually order it online or from a Bissell authorized dealer. Be sure to have your vacuum’s model number handy for accurate ordering.
Q: My vacuum still doesn’t work after reassembly. What should I do?
A: Double-check that all connections are secure and that the filters are properly installed. If the problem persists, you may need to consult your owner’s manual for troubleshooting tips or contact Bissell customer support.
Q: How often should I clean and reassemble my vacuum?
A: It’s a good idea to clean your vacuum filters regularly, at least once a month. You should also disassemble and clean the vacuum body and attachments every few months or as needed.
Q: Can I reassemble my vacuum without the owner’s manual?
A: While it’s possible, it’s highly recommended to refer to your owner’s manual for specific instructions and diagrams. This will ensure that you reassemble the vacuum correctly and avoid any potential damage.