Secret Tips & Tricks: How to Disassemble Bissell Vacuum Effortlessly

Are you tired of your Bissell vacuum losing suction or struggling to pick up dirt? Maybe you’ve noticed a strange smell coming from it, or perhaps you just want to give it a thorough cleaning. Whatever the reason, knowing how to disassemble your Bissell vacuum can be a valuable skill. Disassembly allows you to access the inner workings of your vacuum, enabling you to clean, repair, or replace components as needed.
This comprehensive guide will walk you through the process of disassembling your Bissell vacuum, providing detailed instructions for each step. We’ll cover everything from removing the dustbin and filters to accessing the brush roll and belt. By following these instructions, you’ll be able to confidently take apart your Bissell vacuum and get it back in tip-top shape.

Safety First: Essential Precautions

Before you begin disassembling your Bissell vacuum, it’s crucial to prioritize safety. Here are some essential precautions to keep in mind:

• Unplug the vacuum: Always disconnect the vacuum from the power source before attempting any disassembly. This prevents accidental shocks and ensures your safety.
• Wear protective gear: Consider wearing gloves and eye protection to avoid contact with dust and debris.
• Work in a well-lit area: Ensure you have adequate lighting to see clearly while working.
• Avoid using sharp tools: Use tools specifically designed for disassembling electronics to prevent damage to your vacuum.

Step 1: Removing the Dustbin and Filters

The first step in disassembling your Bissell vacuum is removing the dustbin and filters. This is a straightforward process that should be done regularly as part of your vacuum maintenance routine.
1. Locate the dustbin release button: On most Bissell vacuums, the dustbin release button is located on the side or top of the vacuum.
2. Press the release button: This will disengage the dustbin from the vacuum.
3. Remove the dustbin: Carefully lift the dustbin out of the vacuum.
4. Empty the dustbin: Dispose of the collected dirt and debris in a trash can.
5. Remove the filters: Depending on your Bissell model, there may be multiple filters. Locate the filter release mechanisms and remove the filters.
6. Clean the filters: Rinse washable filters under running water and allow them to air dry completely before reinstalling them.

Step 2: Accessing the Brush Roll and Belt

The brush roll and belt are key components of your Bissell vacuum‘s cleaning mechanism. To access these components, you’ll need to remove the bottom plate of the vacuum.
1. Locate the bottom plate: The bottom plate is typically held in place by a few screws.
2. Remove the screws: Use a screwdriver to remove the screws securing the bottom plate.
3. Remove the bottom plate: Carefully lift the bottom plate off the vacuum.
4. Inspect the brush roll: Examine the brush roll for any signs of wear, damage, or hair tangles.
5. Remove the brush roll: Depending on your model, you may need to release a clip or lever to remove the brush roll.
6. Inspect the belt: Check the belt for cracks, tears, or signs of wear.
7. Remove the belt: If the belt needs to be replaced, you’ll need to remove it.

Step 3: Cleaning and Replacing Components

Once you’ve accessed the brush roll, belt, and other internal components, it’s time to clean and replace them as needed.
1. Clean the brush roll: Use a small brush or a pair of scissors to remove any hair or debris tangled around the brush roll.
2. Clean the belt: Wipe the belt with a damp cloth to remove any dirt or grime.
3. Replace the belt: If the belt is damaged or worn, replace it with a new one.
4. Clean the internal components: Use a vacuum cleaner attachment or a damp cloth to clean any dust or debris from the inside of the vacuum.

Step 4: Reassembling Your Bissell Vacuum

After cleaning and replacing any necessary components, it’s time to put your Bissell vacuum back together.
1. Reinstall the belt: If you replaced the belt, ensure it’s properly seated on the motor shaft and brush roll.
2. Reinstall the brush roll: Secure the brush roll back into its housing.
3. Reinstall the bottom plate: Replace the bottom plate and secure it with the screws.
4. Reinstall the filters: Make sure the filters are properly seated in their slots.
5. Reinstall the dustbin: Snap the dustbin back into place.

Step 5: Testing Your Vacuum

Before using your Bissell vacuum, it’s important to test it to ensure everything is working properly.
1. Plug in the vacuum: Connect the vacuum to the power source.
2. Turn on the vacuum: Activate the vacuum and listen for any unusual noises.
3. Test the suction: Use a piece of paper or a small object to check the vacuum’s suction power.
4. Test the brush roll: Ensure the brush roll is spinning freely and not making any grinding noises.

The Final Touches: A Few Tips for Success

Here are a few tips to help you navigate the disassembly and reassembly process smoothly:

• Take detailed photos: Before you start disassembling, take photos of each step to help you remember the order of reassembly.
• Label your parts: If you’re removing multiple screws, label them with tape or a marker to avoid confusion when putting everything back together.
• Don’t force anything: If you encounter resistance, stop and try to figure out what’s causing the problem. Forcing parts can damage your vacuum.
• Refer to your user manual: Your Bissell vacuum’s user manual may provide specific instructions for disassembly and reassembly.

Beyond Disassembly: Maintaining Your Bissell Vacuum

Disassembling your Bissell vacuum is an important step in keeping it clean and functioning properly. However, it’s essential to practice regular maintenance to prolong its lifespan. Here are some helpful tips:

• Empty the dustbin frequently: Don’t let the dustbin overflow, as this can reduce suction and cause the vacuum to overheat.
• Clean the filters regularly: Rinse washable filters according to the manufacturer’s instructions.
• Check the brush roll and belt: Inspect these components for wear and tear and replace them as needed.
• Store the vacuum properly: When not in use, store the vacuum in a cool, dry place.

Top Questions Asked

Q: What do I do if I can’t find the screws to remove the bottom plate?
A: If you can’t find the screws, try looking for a hidden latch or clip that releases the bottom plate. Refer to your vacuum’s user manual for specific instructions.
Q: How often should I disassemble my Bissell vacuum for cleaning?
A: It’s generally recommended to disassemble and clean your Bissell vacuum every 3-6 months, depending on how frequently you use it.
Q: What should I do if my Bissell vacuum starts making strange noises?
A: If your vacuum starts making strange noises, it’s a good idea to disassemble it and check for any loose parts, obstructions, or damage. If you can’t identify the problem, contact Bissell customer support.
Q: Can I use a regular vacuum cleaner to clean the inside of my Bissell vacuum?
A: While you can use a vacuum cleaner attachment to clean the inside of your Bissell vacuum, be careful not to damage any delicate components. A soft brush attachment is generally the safest option.
Q: What should I do if I’m not comfortable disassembling my Bissell vacuum?
A: If you’re not comfortable disassembling your vacuum, it’s best to take it to a qualified repair technician. They will have the expertise and tools to safely and effectively clean and repair your vacuum.