5 Simple Steps To Keep Your Nutribullet Slow Juicer Sparkling Clean

Maintaining a clean NutriBullet slow juicer is crucial for ensuring optimal performance, preventing bacterial growth, and extending the lifespan of your appliance. This comprehensive guide will walk you through the process of cleaning your NutriBullet slow juicer, providing step-by-step instructions, helpful tips, and troubleshooting advice. Whether you’re a seasoned juicing enthusiast or a beginner navigating the world of slow juicing, this guide will equip you with the knowledge and skills to keep your NutriBullet slow juicer running smoothly and hygienically.

Step 1: Disassembling Your NutriBullet Slow Juicer

1. Unplug the juicer from the power outlet. Safety first! Always disconnect the juicer from the power source before cleaning to prevent any electrical hazards.

2. Remove the pulp container. Locate the pulp container, usually attached to the front of the juicer. Grasp the handle and pull it straight out to detach it from the main unit.

3. Detach the juicing bowl. The juicing bowl is the large, cylindrical container that holds the fruits and vegetables during juicing. To remove it, simply lift it straight up and off the base.

4. Take apart the juicing screen and auger. The juicing screen and auger are located inside the juicing bowl. To disassemble them, unscrew the juicing screen from the auger by turning it counterclockwise. Then, pull the auger out of the juicing bowl.

Step 2: Cleaning the NutriBullet Slow Juicer Parts

1. Rinse the pulp container, juicing bowl, and juicing screen under warm water. Use a soft sponge or cloth to gently remove any remaining pulp or residue. Avoid using harsh abrasives or scouring pads, as these can damage the delicate surfaces of the juicer parts.

2. Soak the juicing screen in a mixture of warm water and dish soap. Allow it to soak for 15-20 minutes to loosen any stubborn pulp or debris.

3. Scrub the juicing screen with a soft toothbrush. Pay special attention to the small holes in the screen, where pulp can easily get trapped. Rinse the screen thoroughly under warm water to remove any soap residue.

4. Clean the auger with a damp cloth. Use a damp cloth to wipe away any pulp or residue from the auger. Be sure to clean the inside and outside of the auger thoroughly.

5. Wipe down the base of the juicer. Use a damp cloth to wipe down the base of the juicer, removing any pulp or juice residue.

Step 3: Reassembling Your NutriBullet Slow Juicer

1. Reattach the auger to the juicing screen. Insert the auger into the juicing screen and screw it on clockwise until it is snug.

2. Place the juicing screen and auger assembly back into the juicing bowl. Align the juicing screen and auger assembly with the corresponding slots in the juicing bowl and press down firmly to secure it in place.

3. Reattach the juicing bowl to the base of the juicer. Align the juicing bowl with the base of the juicer and press down firmly until it clicks into place.

4. Reattach the pulp container to the front of the juicer. Align the pulp container with the corresponding slots on the front of the juicer and press down firmly until it clicks into place.

Step 4: Storing Your NutriBullet Slow Juicer

1. Make sure all parts are completely dry before storing. To prevent mold or bacteria growth, ensure that all parts of the juicer are completely dry before storing them. You can air dry the parts or use a clean cloth to wipe them dry.

2. Store the juicer in a cool, dry place. Choose a storage location that is protected from direct sunlight and moisture. A kitchen cabinet or pantry is a suitable option.

3. Keep the juicer out of reach of children. Store the juicer in a location that is out of reach of children to prevent accidents or injuries.

Troubleshooting Common Issues with Your NutriBullet Slow Juicer

1. The juicer is not working. Ensure that the juicer is properly plugged into a power outlet and that the power switch is turned on. Check for any loose connections or damaged cords.

2. The juicer is making a loud noise. Loud noises during juicing can indicate that the juicer is overloaded or that there is a foreign object stuck in the juicing screen. Unplug the juicer and inspect the juicing screen for any obstructions.

3. The juicer is leaking juice. Juice leakage can occur if the juicing screen is not properly attached or if the pulp container is not securely fastened. Check the juicing screen and pulp container to ensure that they are properly attached and that there are no cracks or damage.

Tips for Maintaining Your NutriBullet Slow Juicer

1. Clean the juicer after each use. Regular cleaning will prevent the buildup of pulp and residue, which can affect the juicer’s performance and lifespan.

2. Use a soft sponge or cloth to clean the juicer parts. Harsh abrasives or scouring pads can damage the delicate surfaces of the juicer parts.

3. Avoid putting the juicer parts in the dishwasher. The high temperatures and harsh detergents used in dishwashers can damage the juicer parts.

4. Store the juicer in a cool, dry place. To prevent mold or bacteria growth, store the juicer in a location that is protected from direct sunlight and moisture.

Quick Answers to Your FAQs

Q: How often should I clean my NutriBullet slow juicer?

*A: It is recommended to clean your NutriBullet slow juicer after each use to prevent the buildup of pulp and residue.*

Q: Can I put the NutriBullet slow juicer parts in the dishwasher?

*A: No, it is not recommended to put the NutriBullet slow juicer parts in the dishwasher, as the high temperatures and harsh detergents can damage the parts.*

Q: What should I do if my NutriBullet slow juicer is making a loud noise?

*A: Unplug the juicer and inspect the juicing screen for any obstructions. If there is a foreign object stuck in the juicing screen, carefully remove it and try juicing again.