Unlock the Secrets: How to Clean Dyson Floor Head for Optimal Performance!

Are you noticing your Dyson vacuum isn’t picking up dirt as well as it used to? The culprit might be a dirty floor head. Just like any other appliance, your Dyson floor head needs regular cleaning to maintain optimal performance. This guide will walk you through the process of how to clean dyson floor head, ensuring your vacuum stays powerful and efficient.

Why Clean Your Dyson Floor Head?

A clean floor head is crucial for several reasons:

• Improved suction: A clogged floor head restricts airflow, reducing the suction power of your vacuum. This can lead to poor cleaning results, leaving behind dirt and debris.
• Longer lifespan: Regular cleaning prevents dust and hair from accumulating and damaging the internal components of the floor head. This extends the life of your vacuum.
• Reduced noise: A dirty floor head can cause excessive noise as the motor struggles to overcome the obstruction.
• Better hygiene: A clean floor head ensures that you’re not spreading dust, dirt, and allergens around your home while you vacuum.

Tools You’ll Need

Before you begin, gather the following tools:

• Screwdriver: You’ll need a small screwdriver to remove screws on some floor heads.
• Small brush: A soft-bristled brush is perfect for cleaning out hair, dirt, and debris.
• Vacuum cleaner hose: You’ll need this to test the suction after cleaning.
• Damp cloth: A damp cloth will be used for wiping down the floor head.
• Optional: Compressed air: This can be helpful for removing stubborn debris.

Step-by-Step Guide to Cleaning Your Dyson Floor Head

Here’s a detailed breakdown of how to clean your Dyson floor head:
1. Disconnect the Floor Head:

• Turn off your Dyson vacuum and unplug it from the power source.
• Locate the release button or latch on the floor head. This is usually located on the side or bottom of the head.
• Press the release button or gently lift the latch to detach the floor head from the vacuum wand.

2. Remove the Brush Bar:

• Most Dyson floor heads have a brush bar that needs to be cleaned.
• Locate the screws holding the brush bar in place.
• Use your screwdriver to carefully remove the screws.
• Gently pull the brush bar out of the floor head.

3. Clean the Brush Bar:

• Use a small brush or your fingers to remove hair, dirt, and debris from the bristles of the brush bar.
• If necessary, use a damp cloth to wipe down the brush bar.
• Avoid using harsh chemicals or detergents as they can damage the bristles.
• Allow the brush bar to dry completely before reinstalling it.

4. Clean the Floor Head Housing:

• Use a small brush or a damp cloth to remove dust and debris from the inside of the floor head housing.
• Pay particular attention to the areas around the brush bar opening and the suction vents.
• If necessary, use compressed air to remove stubborn debris.
• Avoid using water directly inside the floor head housing, as it can damage electronic components.

5. Reassemble the Floor Head:

• Once the floor head housing and brush bar are clean and dry, reassemble the floor head.
• Insert the brush bar back into its housing and secure it with the screws you removed earlier.
• Attach the floor head back to the vacuum wand.

6. Test the Suction:

• Plug your Dyson vacuum back in and turn it on.
• Use the vacuum cleaner hose to test the suction of the floor head.
• If you notice any obstruction or reduced suction, repeat the cleaning process.

Special Considerations for Different Dyson Models

While the general cleaning process is similar across different Dyson models, there are some model-specific considerations:
Dyson Animal Models:

• These models often have a tangle-free turbine tool that requires additional cleaning.
• To clean the turbine tool, remove it from the floor head and use a small brush to remove hair and debris from the rotating brush.

Dyson Ball Animal 2 Models:

• The floor head on these models has a separate brush bar and a roller brush.
• Be sure to clean both brush bars thoroughly.

Dyson V11 & V15 Models:

• These models have a “soft roller head” that is designed for delicate floors.
• The soft roller head can be cleaned by removing the roller brush and cleaning it with a brush or damp cloth.

Maintaining a Clean Dyson Floor Head

To keep your Dyson floor head clean and prevent future clogs, follow these tips:

• Clean your floor head after each use: This will prevent dirt and debris from accumulating and becoming difficult to remove.
• Check your floor head regularly for signs of wear and tear: Replace worn-out brush bars or other components as needed.
• Avoid using your vacuum on rough surfaces: This can damage the brush bar and other components.

Beyond Cleaning: Troubleshooting Common Dyson Floor Head Issues

Sometimes, even with regular cleaning, your Dyson floor head may still experience problems. Here are some common issues and how to troubleshoot them:
1. Reduced Suction:

• Check the floor head for clogs: Remove the brush bar and check for hair, dirt, or other debris.
• Check the vacuum hose for clogs: Remove the hose and check for any blockages.
• Check the filters: Dirty filters can restrict airflow and reduce suction.

2. Noise:

• Check the brush bar for damage: A worn-out brush bar can make a rattling noise.
• Check the floor head for loose parts: Loose screws or other parts can cause rattling.

3. Floor Head Not Turning:

• Check the brush bar for damage: A broken brush bar may prevent the floor head from turning.
• Check the power connection: Ensure the floor head is securely connected to the vacuum wand.

Keeping Your Dyson Vacuum Running Like New

By following these steps and cleaning your Dyson floor head regularly, you can ensure your vacuum stays powerful and efficient. Remember to check for model-specific cleaning instructions and address any issues promptly to keep your Dyson running like new.

Answers to Your Questions

Q: How often should I clean my Dyson floor head?
A: It’s recommended to clean your Dyson floor head after each use, especially if you’ve vacuumed up a lot of hair, dirt, or debris. You should also give it a more thorough cleaning every few months.
Q: Can I use water to clean the entire floor head?
A: No, it’s not recommended to use water directly on the floor head. Water can damage the electronic components and cause rust.
Q: What if my Dyson floor head is still clogged after cleaning?
A: If your floor head is still clogged after cleaning, there may be a more serious issue. You may need to contact Dyson customer support for assistance.
Q: How can I tell if my brush bar is worn out?
A: A worn-out brush bar will have frayed or broken bristles. It may also make a rattling noise when the vacuum is running.
Q: What are some tips for preventing my Dyson floor head from getting clogged?
A: Avoid vacuuming up large objects or debris. Empty your dustbin frequently. And clean your floor head regularly.